Team Associated Truggy - RC8T + Extras
02-21-2015, 11:05 PM
#1
Team Associated Truggy - RC8T + Extras
***SOLD PENDING PAYMENT***
Finally decided to bite the bullet and sell the truggy. I can't afford to run 2 classes any more so the last of my truggies and all my spares must go. There are a few separate items, see below for details.
1) Team Associated RC8T Factory Team -
This is the carbon fibre version. It is fitted with front and rear carbon shock towers, and carbon fibre radio tray modified to take forward battery box. I have removed the original rear battery/receiver box and fitted a much smaller GT2 box just for the receiver.
It has the Maifield Edition adapter on the rear tower so modern truggy bodies can be fitted. The rear tower has also been modified with the "zero" hole for the upper links.
Truck is also fitted with Integy aluminium centre diff mounts (the brakes melt into the plastic ones) and Integy aluminium rear hubs. Also has some narrow hex hubs fitted, not sure what brand. Has DE racing skid plates front and rear also.
Comes with a King Headz extended quick change engine mount fitted.
Everything else is stock, including the steel toe plates (I never upgraded to the alloy ones) and the ackerman plate steering.
Truggy comes as is having just been given a clean up and fresh oils (7/7/3 diffs and 35wt shocks all round), bearings were checked and replaced if gritty.
Overall it is in good condition, but not perfect so it's going cheap.
What it comes with:
the truck
3 sets of tyres (used) Proline Blockade (M3?), Caliber (M4) and Crime Fighter (M2)
All the parts pictured -
used parts (varying states of wear):
1 x carbon front tower
2 x carbon rear tower
2 x carbon radio tray
front and rear arms
diff bulkheads
side guards
DE racing mud guards
a couple of wing mounts
front c-hubs and rear hubs
a bunch of cast steering knuckles
2 full sets of original wide hex hubs
various sway bars
upper links and steering links
numerous plastics including rod ends, shock risers, centre diff risers, suspension pills etc.
original AE 1 piece engine mount, as well as a few 2 piece engine mounts
bunch of axles and driveshaft ends etc.
heaps of other bits
new parts:
rear mount battery box and new lid for forward battery box + foam pads to suit
front chassis stiffener
rod ends, centre diff riser, fuel tank mounts
HD shock ends (2 sets)
2 piece engine mount and plates
brake cams
plastic servo horns
plastic rear hubs
front upper arms
DE racing rear skid plate
The plastic box/tray is also included.
$200
2)Assorted used alloy parts -
a bunch of alloy parts to suit the truggy:
AE machined front knuckles and rear hubs - good
AE steering top plate (black) - good
AE alloy front and rear tower - good
AE alloy toe plates (comes with hinge pins to suit) - varying states of wear from good to bad, see pictures
Integy alloy steering knuckles - good
Integy alloy bulkheads - average
unknown brand silver alloy c-hubs and steering knuckles - good
$50
3)RC8T diffs
3 x front/rear diff (used)
1 x centre diff (used)
52 tooth spur gear and 2 x crown gear (used)
assorted inner diff gears and parts (used)
1 x brand new 54tooth spur gear
$50
4)RC8T shocks
2 sets of used shocks
1 set assembled needing cleanup and rebuild
1 set disassembled needing build
various o-rings, shock ends, pistons etc. both new and used
$50
Willing to accept reasonable offers.
Due to the amount of stuff I would prefer local pickup, but I am willing to post it at the buyers expense.
Cash if picking up, PayPal if posting.
see next post for pictures.
Cheers
Dave
Finally decided to bite the bullet and sell the truggy. I can't afford to run 2 classes any more so the last of my truggies and all my spares must go. There are a few separate items, see below for details.
1) Team Associated RC8T Factory Team -
This is the carbon fibre version. It is fitted with front and rear carbon shock towers, and carbon fibre radio tray modified to take forward battery box. I have removed the original rear battery/receiver box and fitted a much smaller GT2 box just for the receiver.
It has the Maifield Edition adapter on the rear tower so modern truggy bodies can be fitted. The rear tower has also been modified with the "zero" hole for the upper links.
Truck is also fitted with Integy aluminium centre diff mounts (the brakes melt into the plastic ones) and Integy aluminium rear hubs. Also has some narrow hex hubs fitted, not sure what brand. Has DE racing skid plates front and rear also.
Comes with a King Headz extended quick change engine mount fitted.
Everything else is stock, including the steel toe plates (I never upgraded to the alloy ones) and the ackerman plate steering.
Truggy comes as is having just been given a clean up and fresh oils (7/7/3 diffs and 35wt shocks all round), bearings were checked and replaced if gritty.
Overall it is in good condition, but not perfect so it's going cheap.
What it comes with:
the truck
3 sets of tyres (used) Proline Blockade (M3?), Caliber (M4) and Crime Fighter (M2)
All the parts pictured -
used parts (varying states of wear):
1 x carbon front tower
2 x carbon rear tower
2 x carbon radio tray
front and rear arms
diff bulkheads
side guards
DE racing mud guards
a couple of wing mounts
front c-hubs and rear hubs
a bunch of cast steering knuckles
2 full sets of original wide hex hubs
various sway bars
upper links and steering links
numerous plastics including rod ends, shock risers, centre diff risers, suspension pills etc.
original AE 1 piece engine mount, as well as a few 2 piece engine mounts
bunch of axles and driveshaft ends etc.
heaps of other bits
new parts:
rear mount battery box and new lid for forward battery box + foam pads to suit
front chassis stiffener
rod ends, centre diff riser, fuel tank mounts
HD shock ends (2 sets)
2 piece engine mount and plates
brake cams
plastic servo horns
plastic rear hubs
front upper arms
DE racing rear skid plate
The plastic box/tray is also included.
$200
2)Assorted used alloy parts -
a bunch of alloy parts to suit the truggy:
AE machined front knuckles and rear hubs - good
AE steering top plate (black) - good
AE alloy front and rear tower - good
AE alloy toe plates (comes with hinge pins to suit) - varying states of wear from good to bad, see pictures
Integy alloy steering knuckles - good
Integy alloy bulkheads - average
unknown brand silver alloy c-hubs and steering knuckles - good
$50
3)RC8T diffs
3 x front/rear diff (used)
1 x centre diff (used)
52 tooth spur gear and 2 x crown gear (used)
assorted inner diff gears and parts (used)
1 x brand new 54tooth spur gear
$50
4)RC8T shocks
2 sets of used shocks
1 set assembled needing cleanup and rebuild
1 set disassembled needing build
various o-rings, shock ends, pistons etc. both new and used
$50
Willing to accept reasonable offers.
Due to the amount of stuff I would prefer local pickup, but I am willing to post it at the buyers expense.
Cash if picking up, PayPal if posting.
see next post for pictures.
Cheers
Dave
Last edited by schmarkoDave; 02-22-2015 at 05:17 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
