QuangVuong

iTrader: (16)

7.4V 5000mAh 30C Lipo

Discharge Rate : 35C
Burst Rate 40C
Connector :W/Banana/T
Size : 139.5 x 47 x 23.8mm
Weight : 310 g
Charging tempearture: 0 C ~ +45 C
Operating temperature range: -10 C ~ +80

1.This pack includes bullet connectors for charging and balancing,and also includes a balance charge lead. Does not come with a plug.
2.These battery packs can be used in an application where you need 6-cell NiMH stick or race packs,such as 1/10th scale electric touring cars or 2wd and 4wd off-road vehicles
3.These packs are significantly lighter when compared to regular NiMH race packs.This makes the overall vehicle
weight lighter for significantly improve acceleration
4.Carbon design hard case housing,Anti-resistance.

$50 posted each.
$30 each for more batteries.

These are brand new and will be poste from a supplier in China. Postage would take about 2 weeks to get to Aus.

EZrun 5.5t Brushless system

Hobbywing 5.5T Brushless Motor 60A ESC Combo

This combo is specially designed for 1/10 and 1/12 scale ON-ROAD and OFF-ROAD car.
Main applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;
The Combo includes the following items:
eZRun-60A-SL brushless ESC: 1pcs
5.5T sensorless brushless motor: 1pcs
Program card for car ESC: 1pcs
Cooling fan: 1pcs
1 Specification of The ESC
1.1 Output: Continuous current 60A, burst current 380A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo. Note1
1.3 BEC Output: 6V/1.5A.
1.4 Resistance: 0.0007 Ohm
1.5 Motor Supported: Sensorless Brushless motor.
1.6 Suitable Brushless Motor: Note2
eZRun-60A-SL: >=5.5T (Size: 3650)
1.7 Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9 Weight: 32g(Without wires).
Note1:
For 4-6 cells NiMH or 2S Lipo: You needn’t change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.

Features
3.1 Compatible with all sonsorless brushless motor.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3 Excellent start-up, acceleration and linearity features.
3.4 With 2 running modes (Racing mode and Forward/Backward mode).
3.5 With 4 steps of maximum reverse force adjustment.
3.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
3.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
3.10 Easily program with only one button and compatible with pocket-sized program card.
3.11 Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
3.12 Dustproof design for the motor.

Program Card Specification:
Thank you for purchasing the program card for the electronic speed controller (ESC) of car. The program card has a friendly user interface, so you can easily set the programmable parameters of the ESC with this device. It is pocket-sized, so you can bring it to the racing field conveniently.

Package Contents:
100% Brand New
1 x 5.5 T brushless motor
1 x 60A ESC
1 x 3in1+Program Card

$150 posted.

squirt22

iTrader: (5)

do you actually have these items in your hand or are you just trying to do another scam like the tt01 alloy hopup parts. this is to sell stuff you actually own not advertise stuff from ebay to make a quick buck.

QuangVuong

iTrader: (16)

It is not a scam.

Im selling for a CHinese supplier.

squirt22

iTrader: (5)

so do you actually have them in your hand? like maybe a pic from you actually having them in your hands or in a box same quality of the 5000 nimh etc. not from the supplier website?

[[john]]

iTrader: (24)

You could buy from here, and deal with a dodgy 'middle-man' or buy direct from a supplier, and have little to no chance of loosing money..

Ping!

nexxus

iTrader: (315)

Do the forums allow people to advertise items of a commercial nature?

Are the batteries roar legal?

What postage charges are there?

What are your preferred methods of payment?

You have a zero itrader rating, do you have any other references so we know we're dealing with someone who is legit?

Mugenville

iTrader: (25)

Umm, ppl should take the time to actually read what was posted

These are brand new and will be poste from a supplier in China. Postage would take about 2 weeks to get to Aus.

QuangVuong

iTrader: (16)

No the batts are not ROAR legal.

All prices include postage.

Paypal if youre not close to me.Cash also accepted.

DOnt worry, Im a real person. If you dont treceive I will send a refund or the item will be resent. Postage is registered anyway.

squirt22

iTrader: (5)

just to refresh your memories of what happened last time he was selling things he didnt even have in his hands....


http://www.rctech.net/forum/australi...miya-tt01.html

same person.