RC18T, Carbon Fibre Chassis 99% Aftermarket parts, Brushless, Lipo ETC
07-18-2008, 09:43 PM
#1
RC18T, Carbon Fibre Chassis 99% Aftermarket parts, Brushless, Lipo ETC
Hey guys im looking to sell my basically new RC18T.
Its only been run afew times, no scratches or anything visible on the carbon fibre chassis. I rushed building it together so the buyer of this car will most likely have to rebuild the steering, shocks, turnbuckles.
I have prepped the Carbon Fibre chassis with Superglue and sanded it down and perfected it.
It has basically been run 10 times or less. Never been offroad, only on carpet and netball courts.
Im selling this to fund my new e-firestorm project.
Anyways heres the list of parts below, and also this truck started off as a FACTORY TEAM Buggy Kit.
Prices:
QUark 33a universal ESC
C4 9200kv motor
11.1 1100mah lipo 20c
Blue rpm bumper
Blue rpm A-A arms all round
Blue Rpm Front and Rear shock towers
Brand new 3-racing CF kit like chassis and topdeck
New Mip superdiff ( front and rear)
1 x body ( used 2 times) its orange ( associated truck body)
1 x new unpainted body ( associated truck body)
1 x wheely bar (kind of bent lol)
1 x 3racing steering kit
1 x hs65mg servo
1 x DP draglink white ( limited edition)
4 x 3racing shock bottom caps
2 x thetoyz steel gears, i.e diff and pinion front and rear
- Some pinions and some extra spur gears
4 x MIP CVD's ( front and rear)
- 1 stock chassis
- 1 set of 1/10th touring car wheel adapters ( yeah racing) ( silver)
New 3racing hinge titanium pin kit
1 x New alloy motor mount ( factory team kit)
2 new gearbox's new in pack, plus the new ones put in the car.
1 x thetoyz heatsink
- ti turnbuckles set with spare ballcups ( new in pack)
-factory team alloy shocks
3 racing alloy motor mount
full ball bearings
alloy blue driveshaft
rear blue alloy toe-in camber
1 set of stock rc18b tyre's and rims
2 sets of 1/10th scale tyre's and wheels ( tamiya and some other brand)
1 set of slicks ( 1/10th scale tamiya)
1 set of titanium hinge pins ( 3racing)
1 new spare set of stock screws ( some used in the car)
Heres the deal:
I am from Sydney Australia, Postcode 2119.
I will send this item via registered post.
I accept Paypal and maybe Pickup.
If you want to pick this item up, you must meet me at my local train station ( beecroft station) or at Macquarie Shopping Centre.
This car is basically new, and all that needs to be done is to fix the steering and break in the new gearbox's, since MIP superdiffs are thicker then the normal diffs. The rear gearbox has already been broken in, so the plastic expands and the diff is really smooth, the front is still binding so you need to run this car for about 1hour to loosen up the gearbox.
I have spent over $900 on this car, and i will let it go for $500 shipped with everything, or $400 without the brushless motor and ESC. Also NO RADIO GEAR IS INCLUDED so the receiver in the pictures isnt included.
I am Negotiable and so the price may drop a LITTLE bit.
Thanks.
Its only been run afew times, no scratches or anything visible on the carbon fibre chassis. I rushed building it together so the buyer of this car will most likely have to rebuild the steering, shocks, turnbuckles.
I have prepped the Carbon Fibre chassis with Superglue and sanded it down and perfected it.
It has basically been run 10 times or less. Never been offroad, only on carpet and netball courts.
Im selling this to fund my new e-firestorm project.
Anyways heres the list of parts below, and also this truck started off as a FACTORY TEAM Buggy Kit.
Prices:
QUark 33a universal ESC
C4 9200kv motor
11.1 1100mah lipo 20c
Blue rpm bumper
Blue rpm A-A arms all round
Blue Rpm Front and Rear shock towers
Brand new 3-racing CF kit like chassis and topdeck
New Mip superdiff ( front and rear)
1 x body ( used 2 times) its orange ( associated truck body)
1 x new unpainted body ( associated truck body)
1 x wheely bar (kind of bent lol)
1 x 3racing steering kit
1 x hs65mg servo
1 x DP draglink white ( limited edition)
4 x 3racing shock bottom caps
2 x thetoyz steel gears, i.e diff and pinion front and rear
- Some pinions and some extra spur gears
4 x MIP CVD's ( front and rear)
- 1 stock chassis
- 1 set of 1/10th touring car wheel adapters ( yeah racing) ( silver)
New 3racing hinge titanium pin kit
1 x New alloy motor mount ( factory team kit)
2 new gearbox's new in pack, plus the new ones put in the car.
1 x thetoyz heatsink
- ti turnbuckles set with spare ballcups ( new in pack)
-factory team alloy shocks
3 racing alloy motor mount
full ball bearings
alloy blue driveshaft
rear blue alloy toe-in camber
1 set of stock rc18b tyre's and rims
2 sets of 1/10th scale tyre's and wheels ( tamiya and some other brand)
1 set of slicks ( 1/10th scale tamiya)
1 set of titanium hinge pins ( 3racing)
1 new spare set of stock screws ( some used in the car)
Heres the deal:
I am from Sydney Australia, Postcode 2119.
I will send this item via registered post.
I accept Paypal and maybe Pickup.
If you want to pick this item up, you must meet me at my local train station ( beecroft station) or at Macquarie Shopping Centre.
This car is basically new, and all that needs to be done is to fix the steering and break in the new gearbox's, since MIP superdiffs are thicker then the normal diffs. The rear gearbox has already been broken in, so the plastic expands and the diff is really smooth, the front is still binding so you need to run this car for about 1hour to loosen up the gearbox.
I have spent over $900 on this car, and i will let it go for $500 shipped with everything, or $400 without the brushless motor and ESC. Also NO RADIO GEAR IS INCLUDED so the receiver in the pictures isnt included.
I am Negotiable and so the price may drop a LITTLE bit.
Thanks.
Last edited by SN33KY; 07-18-2008 at 09:59 PM.
07-18-2008, 09:54 PM
#2
Pictures
07-23-2008, 05:02 AM
#3
its got deans aswell.
07-25-2008, 02:26 AM
#4
throw me some offers!
07-26-2008, 06:23 AM
#5
any interest at all?
If you dont want to break in the gearbox's you can switch to gpm titanium outdrives for $40... basically sell the mip superdiffs on ebay for $30...
Throw me offers!
If you dont want to break in the gearbox's you can switch to gpm titanium outdrives for $40... basically sell the mip superdiffs on ebay for $30...
Throw me offers!
07-26-2008, 06:26 AM
#6
oh yeah
$400 shipped via registered post INC BRUSHLESS
So you get the Dynamite c4 9200kv motor + Quark 33a Universal ESC
$400 shipped via registered post INC BRUSHLESS
So you get the Dynamite c4 9200kv motor + Quark 33a Universal ESC
08-06-2008, 05:23 AM
#7
Also on ebay
bump~
prefer to sell on here than on ebay...
$400 shipped with everything
bump~
prefer to sell on here than on ebay...
$400 shipped with everything
08-06-2008, 04:41 PM
#9
thanks mate... noone bought it yet on ebay and its sitting at $415 posted... i think its a super deall
08-11-2008, 05:09 AM
#10
$400 shipped for the lot
$300 shipped for the lot without brushless system
$300 shipped for the lot without brushless system
08-12-2008, 05:05 AM
#11
please dont bother offering me $200 for everything without the brushless system it is worth more
$300 is a bargain as it is
$300 is a bargain as it is
08-14-2008, 06:14 AM
#12
$380 shipped with a bigger motor
370sized 4900kv motor...
not including the c4 motor
370sized 4900kv motor...
not including the c4 motor
08-16-2008, 11:04 PM
#13
BUMP!
08-17-2008, 04:13 AM
#14
08-17-2008, 04:43 AM
#15
$300 for the lot not inc brushless system
ryde races them i think
ryde races them i think