Sirio2127

iTrader: (1)

I am Selling a freshly Broken-in Sirio 21 wcr on-road engine number 42 of 500 made world wide. It come's with the engine pipe and header all pipe fitings and brand new in packet set of front and rear bearing + 3 new conrods. The engine was broken-in and run for one club race meet. I replaced the bearings and rod directly after i finished braking-in the engine. It would have a max of 4ltrs of at racing fuel 5 and 5% oil mix and 25% nitro. It is very fast and i have too many engines and parts and i'm straped for cash to go racing for this year i'm open for all resnabale offers. Thanks for looking and Best Regards Jeremy.

Sirio2127

iTrader: (1)

The engine will also come with a spare block underhead button liner screws and a new sirio turbo 7 glow plug + 8.5mm and 9mm carby ristrectors.An 8mm is in one carby and a 8.5mm is in the engine in the wooden box it will also include the crank for the spare parts engine. This engine was a gem ran for well over 40+ ltr's of fuel befor it broke the piston skirt. But it did not damage the engines crank block or backplate and underhead button. The carby is fresh and has been refreshed with new o-rings it will set to factory settings as well. The parts are simpy as spare's for a major engine failure this engine was number 43 of 500 made. Thanks and Best Regards Jeremy.

Sirio2127

iTrader: (1)

Pic's of the spare wcr crank sorry about the poor quality.

Sirio2127

iTrader: (1)

I also have a L collari innotech xs 390 engine that i recived with a second hand car. I replased the rod in this engine because i hade one sitting around. It runs a friend of mine had what he thought was engine truble so i told him to test the engine to see if it would run. It ran but he was having simlar ishues as his outher engine and he found out that it was his tank not sealing properly. It also has been moded buy some one I'm not shore who but it has good compreshion and it dose run its a standard plug type 21 on-road engine. The engine is parts compatable with axe rossi engine parts such as the axe rossi maranello engine. 60 dollars is all im asking Thanks and Best Regards Jeremy. payment Pending

Sirio2127

iTrader: (1)

The L Collari innotech xs390 can also come with a matching pipe for the engine. It is an efra 2009 pipe and header these engines have a 22 deg angled exhaust port on the crank case and you may find it hard to attach a normal style of pipe header to the innotech engine. If baught with out the engine it will be 20 bucks. If you buy the engine and pipe you can have the pipe for 10 bucks. I will post picks of it soon as well the pipe is a bit marked but its not that bad. Thanks and Regards Jeremy. Payment Pending

Sirio2127

iTrader: (1)

I just had a look in my left overs box and the xs390 will come with a bunch of mistic parts for the innotech sires of axe rossi based engines i think there is maby 3 carbys a few blocks back plates head shims i think its an xs 400 off road engine crank that is new probaly more l collari innotech stuff as well. Regards Jeremy. Payment Pending

Sirio2127

iTrader: (1)

Here is pic's of the L collari xs engine stuff. Payment Pending

Sirio2127

iTrader: (1)

This lot of parts is all from sirio bk evo 2 engine's. It may look like a jumbled bunch of parts. I can ashore you there is one good engine in there and a bunch of parts the block with bearings in it needs them replased. Then you can have an engine with a litle time and tender love and care. 150 for the lot Regards Jerermy. "I might also add none of the engine parts have been moded except for the engine head. I engraved it with Mods by joe dirt team shit spec as a joke with one of my good friends".

Sirio2127

iTrader: (1)

This is parts of an rb concepts C4 i think its an off road one because the carby is a compaset type i got this engine with a drag car i braught in from the usa. It was shaged when i got it this is all i could salvage the outher blue carby is off a mach 21 turbo off road engine but it will fit a novarossi or novarossi based engines and also os and maby a hyper 21 engine. Free just have to pay postage maby some one can use it. Regards Jeremy.

Sirio2127

iTrader: (1)

This engine is a sirio 27 pro 11 port monster this was my very first sirio engine and it cost me a fortune in buggy on-road tirers. The engine is crazy it would be a good idear to replace the rod but you could still run it as is. It has been sitting for over 2 years but i'm shore it could be made to sing angen. 100 dollars Regards Jeremy.

PRospeked

iTrader: (7)

Dude, nice engine but you need to learn the power of the full stop and the spell checker.

Good luck with sale!

Sirio2127

iTrader: (1)

Noted Thanks for the advice.

Sirio2127

iTrader: (1)

I built a sirio 21 bk evo 2 from the parts for sale in one of my earlyer posts. there is now 1 complet engine its still the same price as the parts lot i will post pic's of it inside and out tomorrow night. Regards Jeremy.

Sirio2127

iTrader: (1)

Here is pic's of the sirio 21 BK evo 2 Kanai 5+2 port race off-road engine. I cleaned the engine and built it useing the best of the parts from the parts lot. It is now ready to use and has extreamy good compreshion. The only improvement that could be done to it is replacing of the front and rear bearings. I can do this but it will cost 80 dollars extra. I think the picks speak for the condishion of the engine. I owned about 6 or more of these engines and i know them back to front. Thanks and Regards Jeremy. ("This engine is 150 dollars and for an extra 80 dollars eather with new bearings in packet or i can put them in if you want. It will also come with the rest of the bk evo 2 parts lot i think there is a engine head block rod piston and liner that sill needs running in and a bunch of outher parts carbys and so on.")