how to make your own cheap PVC drift tire:

1. Buy a 2" PVC piping... bring your rim sa hardware so you can check if it exacly fits... note* check the pvc ifs perfectly round, if not papalitan niyo sa hardware


2. Cut the PVC using a pvc cutter... you can use other methods as long as the pvc keeps it's shape... but this is the best way. make sure na ang lapad ng pvc cut ay kasing size ng rims


3. insert the cut pvc into the rims... if hindi sakto ang pasok put electrical tape around the rim so it fits well... then glue it


pics are from http://www2.ocn.ne.jp/~sw-pal/DRIFT/...rift-Tiya.html

your drift tires should look like this


*note* use pvc on all four rims to make your car drift gracefully

happy drifting